====== Configurer le réseau sous Linux ====== ===== RedHat / Fedora ===== Pour configurer eth0, éditer le fichier Dans **/etc/sysconfig/network-scripts/ifcfg-eth0** : ONBOOT=yes DEVICE=bond0 BOOTPROTO=static IPADDR=192.168.0.4 NETMASK=255.255.255.0 BROADCAST=192.168.0.255 La passerelle par défaut se configure toujours dans le fichier **/etc/sysconfig/network** : GATEWAY=192.168.0.254 Pour ajouter des routes statiques pour eth0, créer et éditer le fichier **/etc/sysconfig/network-scripts/route-eth0** : 10.1.0.0/24 via 192.168.0.253 10.0.0.1 via 192.168.0.253 Ci-dessus, nous passons par la passerelle **192.168.0.253** pour atteindre le réseau **10.1.0.0/24** et l'hôte **10.0.0.1** ===== Debian / Ubuntu ===== Sous Debian, tout est configuré dans le fichier **/etc/network/interfaces** : # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo eth0 iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.0.4 netmask 255.255.255.0 gateway 192.168.0.254 post-up route add -net 10.1.0.0/24 gw 192.168.0.253 post-up route add 10.0.0.1 gw 192.168.0.253 :!: Ce fichier de configuration est la même configuration que RedHat plus haut.